E.F. Johnson Company 9800 Series Informations techniques télécharger pdf (Page 44)

SMARTNET/SMARTZONE FEATURES

2. To change the displayed status, scroll through the status list by rotating

the Select switch. Press the

STATUS option switch again to cancel this

function.

3. Press the PTT switch to send the status. When the message is received

and acknowledged by the dispatcher, a signaling success tone (six

beeps) sounds and the display returns to the normal channel indication.

If there is no acknowledgment after 6 seconds, a tone sounds and “NO

ACK” is displayed. Press the

STATUS option switch again to return to

normal operation.

Emergency Alarm/Call

Introduction

Emergency Alarms and Calls are separate functions that can be indi-

vidually enabled or disabled on each SMARTNET/SmartZone system by

dealer programming. The

EMER option switch is also required for these

functions, and it is always the button to the left of the display when it is

used. Emergency Alarms and Calls are transmitted on the

preprogrammed emergency talk group.

Emergency Alarms

An emergency alarm is a special data transmission that alerts a

dispatcher of an emergency situation. Proceed as follows to activate an

emergency alarm:

1. Select a SMARTNET/SmartZone channel that has this feature enabled

and then press the

EMER option switch. The radio then begins auto-

matically transmitting an emergency alarm data message and

“EMERGNCY” is indicated in the display for 3 seconds.

2. When the emergency alarm is acknowledged, the emergency acknowl-

edge tone (two beeps) sounds. Silent operation may also be

programmed in which case no tone sounds and there is no indication

that an acknowledgment occurred.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 55 56

Pas de commentaire

E.F. Johnson Company 9800 Series Informations techniques Page 44