E.F. Johnson Company VR-CM50 Manuel de l'opérateur télécharger pdf (Page 101)

CALL SEQUENCES

B-3

Revised August 2001

Part No. 002-3139-078

7. Press the PTT on Mobile-2.

• D-CIM changes to Duplex Task “6”.

• O-CIM changes to Transmit Task “3”.

• Mobile-1 hears the voice of Mobile-2.

8. Release the PTT on Mobile-2.

• D-CIM changes to Transmit Task “3”.

• Mobile-1 is silent.

9. Press the PTT on Mobile-1.

• O-CIM changes to Duplex Task “6”.

• Mobile-2 hears the voice of Mobile-1.

10.Release the PTT on Mobile-1.

• O-CIM changes to transmit Task “3”.

• Mobile-2 is silent.

11.Press the PTT on Mobile-1.

12.Press DTMF “#” key for longer than 1 second.

• O-CIM changes to the End Call Task “E”.

• Mobile-1 hears the “End Call Tone”.

• O-CIM changes to Idle Task “2”.

• O-SNM changes to the Idle Task “2”.

• D-SNM changes to the End Call Task “C”.

• D-CIM changes to the End Call Task “E”.

• Mobile-2 hears the “End Call Tone”.

• D-CIM changes to the Idle Task “2”.

• D-SNM changes to the Idle Task “2”.

B.6 MOBILE TO UNIQUE ID FOR A MOBILE

OUTSIDE SWITCH

Use two mobiles defined to different Home and

Group ID.

NOTE: Some of these tasks change rapidly.

1. Mobile-1, the originating mobile, selects the Auxil-

iary Call group code.

2. Press the PTT of Mobile-1 to access the system.

• The originating CIM (O-CIM), changes from Idle

Task “2” to Dial Tone Task “C”.

3. Release the PTT of Mobile-1.

• Mobile-1 hears “Dial Tone” from O-CIM.

4. Press the PTT of Mobile-1.

5. When Mobile-1's transmit light is lit, Enter 7-

DTMF digits, 3 for Locality outside the Switch and

4 for the Unique ID of Mobile-2 (terminating

mobile).

6. Release the PTT of Mobile-1.

• Mobile-1 hears the “Confirmation Tone” from the

O-CIM confirming the acceptance of the digits.

• O-CIM changes to the Ringing Task “D”.

• Mobile-1 hears “Ringing Tone” from the O-CIM.

• Originating SNM (O-SNM) changes from

Idle Task “2” to SNM Outgoing Task “8”.

• Destination SNM (D-SNM) changes from

Idle Task “2” to incoming Seize Task “3”.

• D-SNM changes from Incoming Seize Task “3” to

SNM Incoming Task “4”.

• D-SNM changes to Incoming Channel Task “5”.

• O-SNM changes to Outgoing Channel Task “9”.

• Destination CIM (D-CIM) changes from

Idle Task “2” to Transmit Task “3”.

• Mobile-2 hears “Ringing Tone”.