E.F. Johnson Company 9800 Series Manuel de service Page 48
- Page / 69
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
PROGRAMMING
3-22
Revised January 2001
Part No. 001-7780-501
3.6.8 SETTING UP SMARTNET/SMARTZONE
CHANNELS
The SMARTNET/SmartZone Channel screen
shown in Figure 3-4 is displayed when the
SMARTNET or SmartZone channel type is selected.
This screen programs unique channel parameters and
also assigns channels to the selectable zones displayed
by the transceiver.
The general procedure for setting up a
SMARTNET/SmartZone channel is as follows. Refer
to the descriptions which follow this procedure for
information on SMARTNET/SmartZone Channel
screen parameters.
1. Make sure that the desired zone is selected in the
Zone box.
2. Select the channel number in the Channels Index
box which is to be programmed with the channel.
3. To set up a SMARTNET channel, select
“SMARTNET” as the channel type, and to set up a
SmartZone channel, select “SmartZone”.
4. Click the Modify button to display the dialog box
shown in the lower part of Figure 3-4. This box
programs the alias (tag) that is displayed when it is
selected.
5. Program the other parameters in the main part of the
screen (see information which follows).
3.6.9 SMARTNET/SMARTZONE CHANNEL
SCREEN PARAMETERS
The following parameters are programmed in the
SMARTNET/SmartZone channel screen shown in
Figure 3-4.
Selected Channel
Zone Box
- Clicking the arrow to the right of this
box displays the available zones. Click on a zone to
select it. Zones and zone aliases are set up on the
Radio-Wide General screen described in Section
3.4.2.
Channel Index Box
- Displays the channels in the
selected zone. The channel type is selected by the
Channel Type box below it.
- Displays the screen shown in the
lower part of Figure 3-4. The parameters
programmed in this screen are as follows:
Channel - Selects the channel to be edited.
Alias - Programs the identification that is displayed
when the channel is selected. Up to 8
characters can be programmed.
Transmit - Not programmable because the transmit
frequency is dynamically assigned over the
air (“Trunked” is always displayed).
Receive - Dynamically assigned like the transmit
frequency.
Enable This Channel - Not used because SMART-
NET/SmartZone channels are always
enabled if set up. To disable a channel so
that it is not selectable, choose the conven-
tional type and do not check this box.
Copy Parameters From Channel - If another channel
is selected in the box, the parameters from
that channel are copied to the new channel.
Channel Type
Channel Type Box
- Selects the specific system
from which the channel is selected. All programmed
systems are displayed by number and type (conven-
tional, SMARTNET, SmartZone). When a different
channel type is selected, the screen for that type of
channel is automatically displayed.
Other Screen Parameters
System Specific Information
- With SMARTNET/
SmartZone systems, indicates the system ID
programmed on the system General screen (see
Section 3.6.2).
Talk Group
- Selects the talk group selected by that
channel. Talk groups are programmed in the Talk
Group screen described in Section 3.6.5.
Announcement Group
- Selects one of up to three
announcement groups selected by the channel.
Refer to “Announcement Group Screen” in Section
3.6.7 for more information.
- 800 MHZ MOBILE 1
- Service Manual Addendum 2
- TABLE OF CONTENTS 3
- TABLE OF CONTENTS (CONT’D) 4
- LIST OF FIGURES 4
- LIST OF TABLES 4
- 0 A 12345 5
- GENERAL INFORMATION 6
- 1.5.4 NPSPAC MODELS 7
- 1.5.5 PROGRAMMING 7
- 1.5.6 TRANSCEIVER ALIGNMENT 7
- 2.2.2 DISPLAY DESCRIPTION 9
- OPERATION 10
- Revised January 2001 10
- Part No. 001-9800-501 10
- 2.3.6 HOME ZONE 11
- 2.3.7 TIME-OUT TIMER 11
- 2.3.8 TONE ENABLE/DISABLE 11
- 2.3.9 POWER TURN-OFF DELAY 11
- 2.3.11 SCANNING 12
- S” icon is 12
- MONITORING 12
- S” icon or 13
- S”) is indicated in the 14
- SMARTZONE OPERATION 14
- 2.4.6 CALL GUARD SQUELCH 16
- 2.4.7 PENALTY TIMER 16
- 2.4.8 CONVERSATION TIMER 16
- 2.4.9 REPEATER TALK-AROUND 16
- 2.4.10 POWER OUTPUT SELECT 16
- S” icon is then indicated 17
- P” is indicated 17
- 2.5.2 VIEWING UNIT ID 19
- 2.5.3 STANDARD GROUP CALLS 19
- C” in the 19
- C” in the upper part of the 20
- 2.5.6 TELEPHONE CALLS 22
- 0-9, , and # keys. To 22
- 2.5.7 CALL ALERT 23
- 2.5.8 MESSAGING 23
- 2.5.11 FAILSOFT OPERATION 24
- 2.5.13 DYNAMIC REGROUPING 25
- 2.5.14 SMARTZONE FEATURES 25
- 2.6 SUPERVISORY TONES 26
- 3.1 GENERAL 27
- 3.1.1 PROGRAMMING SETUP 27
- 3.1.2 COMPUTER DESCRIPTION 27
- TRANSCEIVER 28
- 3.1.5 STARTING AND EXITING 28
- 3.1.6 PROGRAMMING FILE TYPES 28
- 3.1.7 HELP FILES 29
- 3.1.8 SCREEN GROUPS 29
- 3.1.9 DISPLAYING SCREENS 29
- PROGRAMMING 30
- Part No. 001-7780-501 30
- 3.4.1 INTRODUCTION 33
- Radio-Wide Scan List Screen 33
- Modify List Screen 34
- CHANNELS 38
- PARAMETERS 39
- SYSTEMS AND CHANNELS 40
- 3.6.1 INTRODUCTION 40
- GENERAL SCREEN 40
- OTHER ID’S SCREEN 41
- PHONE INTERCONNECT SCREEN 42
- TALK GROUPS SCREEN 42
- EMERGENCY SETTINGS SCREEN 43
- SCREEN PARAMETERS 48
- 800 MHz Channels 50
- Figure 4-1 Alignment Setup 57
- 4.1 GENERAL 57
- 4.1.1 INTRODUCTION 57
- 4.1.2 TEST SETUP 57
- • Windows 58
- • 4 megabytes of RAM 58
- • An available serial port 58
- 4.2 TRANSMIT POWER OUTPUT 59
- 4.3 FREQUENCY SET/VCO CHECK 60
- 4.4 TRANSMIT MODULATION 60
- 4.6 SQUELCH ADJUSTMENT 61
- 4.7 RSSI ADJUSTMENT 61
- 4.8 PERFORMANCE TESTING 61
- 98xx RF Board Part Change 62
- DSP Board Parts List 62
- Ref No. Description Part No 63
- Part Number 001-9800-501 69
- 1-01 hph Printed in U.S.A 69
Produits connexes et manuels pour Les radios bidirectionnelles E.F. Johnson Company 9800 Series
(27 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.437 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels