E.F. Johnson Company 5300 Series Instructions d'exploitation télécharger pdf (Page 105)

ES Series Mobile Radio Operating Manual 5-23

Conventional Mode Features

Proceed as follows to select channels using this mode:

1 Enable the direct Channel Select mode selecting it via the menu or by pressing the

Channel Select option switch. A single beep sounds when the switch is pressed (if that

option is enabled). The alias and sequential number of the current channel are

alternately displayed.

2 Select the desired channel using the Up/Down keys or directly enter the three-digit

number using the 0-9 keys. (i.e., channel 1 must be entered as 001.) A single beep

sounds when the channel is changed (if that option is enabled). If using the 0-9 keys,

the radio attempts to display the entered number after the third digit is entered or

approximately two seconds after the last key is pressed.

3 To exit this mode and select the entered channel, press the Channel Select switch again.

This mode is also exited automatically without changing the channel after

approximately one minute of no activity.

Note The Channel Select function should probably not be assigned to a number key because

pressing that key to select a channel then exits the select mode.

5.13.8 P25 Conventional Telephone Calls

Telephone calls can be placed and received on P25 conventional channels with a Network

Interface Unit (NIU). EFJohnson also supports telephone calls to be placed and received

over other vendor’s public telephone. Telephone calls are programmed to operate in one

of the following modes:

• Disabled

• Answer-only capability

• List only - Telephone numbers can be selected from a preprogrammed list only (direct

entry as follows is not allowed)

• Unlimited - Telephone numbers can be selected from a list and also dialed directly

(press and hold) entered using the front panel controls or the keypad on the HHC.

All models have the capability to place telephone calls by recalling the number from a list

or dialing it using the front panel controls or using the Handheld Control Unit (HHC)

telephone keypad. More information on how to do this follows.

Seq. Ch. No. Zone Channel

1 - 16 1 1 - 16

17 - 32 2 1 - 16

33 - 48 3 1 - 16

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 215 216

Pas de commentaire

E.F. Johnson Company 5300 Series Instructions d'exploitation Page 105